MILLING & MACHINING CENTERS
| 1 |
MAKINO A55E HORIZONTAL MACHINING
CENTER
Two 16” Pallets – travels X 22 “,
Y 22 “, Z 23.6 “ – Spindle RPM
14,000 – Rapids 3300 IPM – Full Fourth
Axis – 5th Axis Index -1000 PSI coolant thru
spindle –Renishaw Touch Probe – 25 Horsepower
– 60 tools |
| 1 |
MAKINO A51-B HORIZONTAL MACHINING CENTER
16” Pallets – travels X 22”,
Y 22“, Z 23.6“ – Spindle RPM
14,000 Rapids 2000 IPM – Full 4th Axis –
coolant thru spindle –31 HP – 134
tools |
| 1 |
MAKINO A51 HORIZONTAL MACHINING CENTER
16” Pallets – travels X 22”, Y
22“, Z 23.6“ – Spindle RPM 12,000
Rapids 2000 IPM – Full 4th Axis – coolant
thru spindle – 29 HP – 134 tools |
| 1 |
FADAL 4020 VERTICAL MACHINING CENTER 15,000 RPM
40 “ x 20 “ x 28 “ (Z) travel
– 30 tools
22.5 HP – full 4th axis – 5th axis ready
– rigid tapping – coolant thru spindle |
| 6 |
FADAL 4020 VERTICAL MACHINING CENTER
40 “ x 20 “ x 28 “ (Z) travel
– 30 tools – 10,000 RPM – 22.5
HP – full 4th axis – 5th axis ready
– rigid tapping – coolant thru spindle
|
| 4 |
FADAL 3016 VERTICAL MACHINING CENTER
30 “ x 16 “ x 28 “ (Z) travel
– 21 tools – 10,000 RPM – 22.5
HP – full 4th axis – 5th axis ready
– rigid tapping – coolant thru spindle |
| 1 |
MHP V-24 VERTICAL MACHINING CENTER
24 “ x 12 “ x 6 “ (Z) travel –
full 4th axis – 24 tools |
| 6 |
MOOG 83-3000 VERTICAL MACHINING CENTER
20 “ x 10 “ x 6 “ (Z) travel –
full 4th axis – 24 tools |
| 1 |
SWI CNC TOOL ROOM MILLING MACHINE
16 “ x 30“ travel – 10HP |
| 1 |
KEARNEY & TRECKER MODEL 205-S12 VERTICAL MILLING
MACHINE
7 1/2HP – No. 50 milling machine taper tooling |
| 1 |
KEARNEY & TRECKER MODEL 205-S12 HORIZONTAL
MILLING MACHINE
7 1/2HP – 14 “ x 36 “ travel table
– No. 50 milling machine taper tooling |
| 5 |
BRIDGEPORT SERIES I MILLING MACHINES
2 HP – 12 “ x 36-” travel table
– 3 axis Analam digital read-out |
| 2 |
HARDINGE TOOL ROOM MILLING MACHINES |
TURNING
| 2 |
OKUMA LU15 4-AXIS CNC LATHE
8-” chuck – 20-” swing –
20 tools - 4500 RPM |
| 1 |
OKUMA & HOWA ACT-3 X 4 AXIS CNC
LATHE
10-” chuck – 18-” swing –
20 tools- 3600 RPM |
| 4 |
WARNER & SWASEY WSC-8 CNC LATHE
8-” chuck – 2-” bar – 10
tool stations – 4000 RPM |
| 1 |
WARNER & SWASEY 1SC CNC LATHE
10-” chuck – 2 _ -” bar –
12 tool stations |
| 1 |
MAZAK ENGINE LATHE
18-” swing – 100-” centers –
3 1/8-” hole thru spindle
2 axis Analam digital read-out |
| 1 |
HARDINGE SPEED LATHE
6-” chuck – 1-1/16-” bar |
| 1 |
LOGAN TURRET LATHE
1 1/2-” bar capacity – 8-” chuck |
| 1 |
WADE-SECOND OPERATION LATHE
1 1/16-” bar capacity |
| 1 |
MONARCH EE TOOL ROOM LATHE
10-” swing – 20-” centers |
| 1 |
HARDINGE MLV TOOL ROOM LATHE
10-” swing – 30-” centers |
DRILL PRESSES
| 8 |
POWERMATIC DRILL PRESSES
15 “ |
GEAR CUTTING
| 2 |
FELLOWS 7125S HIGH-SPEED GEAR SHAPER
Special high-accuracy – 6 “ O.D.P.D.
– 5 “ I.D.P.D. –
1 1/2 face width |
| 2 |
BARBER COLEMAN GEAR HOBBING MACHINE
Model No. 6-10, 3 “ diameter x 4 “ length.
Crown attachment on one machine. |
GRINDING
| 1 |
BROWN & SHARPE MODEL 818 SURFACE GRINDER
8 “ x 18-” table travel – power
feed 3 axis – over-the-wheel
dresser, electromagnetic chuck |
| 1 |
NORTON
10 “ x 20 “ universal O.D. – I.D.
grinder |
| 2 |
K.O. LEE MODEL B6062H UNIVERSAL O.D.-I.D. TOOL
GRINDER
8 “ swing – 24 “ between centers |
| 1 |
HARIG - 6 X 18 SURFACE GRINDER |
| 1 |
SUNNEN HONING MACHINE MODEL MBC 1804E
Auto stroke – auto gauge – Sunnen bore
gauge – Complete set of stones, mandrels,
and gauge heads |
| 1 |
BLANCHARD GRINDER MODEL 18-36
36 “ chuck |
| 1 |
BURR KING MODEL 760 BELT SANDER |
| 1 |
KALAMAZOO 6” BELT SANDER |
BROACHING
| 1 |
COLONIAL 10 TON VERTICAL PULL
DOWN BROACHING MACHINE
54 “ – full set of retrievers and shuttle
table – set up for running one, two or three
stations |
| 1 |
AMERICAN 6-TON VERTICAL TRI-WAY
BROACHING MACHINE
24 “ – for vertical pull down, vertical
push down and vertical surface |
LASER MARKING
| 1 |
CONTROL MICRO SYSTEMS- 100 WATT CO2 LASER MARKING
SYSTEM
With galvo mirror and 20 “ by 20 “ X-Y
CNC Table |
FORMING
| 1 |
PH 2-TON STROKE 12” HYDRAULIC PRESS |
| 1 |
CHICAGO PNEUMATIC FLOOR MODEL # CP21803 RIVETER |
| 1 |
CHICAGO PNEUMATIC C SQUEEZE RIVETER |
| 1 |
TAUMEL MODEL BK-200NM ORBITAL HEADING
MACHINE
6,000-lb. capacity |
| 1 |
DAKE 75-TON HYDRAULIC PRESS |
SAWING & MATERIAL HANDLING
| 2 |
AMADA MODEL 250HW 10” CNC HORIZONTAL CUT-OFF
SAW |
| 1 |
DO-ALL MODEL #3612-2H 36” VERTICAL CONTOURING
BAND SAW
With power table feed |
| 1 |
CATERPILLAR
4,000 lb. Electric Forklift |
| 1 |
TOYOTA
6,000 lb. Electric Forklift |
| 1 |
KALAMAZOO VERTICAL 24” BAND SAW MODEL 24-V-1024 |
| 1 |
MARVEL SEMI-AUTOMATIC CUT-OFF HORIZONTAL 10”
BAND SAW |
| 1 |
5-TON OVERHEAD CRANE |
| 1 |
FORD 350 FLAT BED ONE-TON TRUCK |
MISCELLANEOUS
| 1 |
ROCKLINIZER MODEL 600 |
| 2 |
QUACKENBUSH DRILLS WITH MULTIPLE HEADS |
FINISHING
| 1 |
ALMCO MODEL V17 VIBRATORY TUB |
| 1 |
ALMCO MODEL OR3 VIBRATORY BOWL FINISHER |
| 1 |
ALMCO MODEL VB-1615 VIBRATORY FINISHING MACHINE
with MODEL ST-1 FILTRATION UNIT |
| 1 |
BINKS PAINT SPRAY BOOTH
10 feet x 10 feet – heated make-up air |
ASSEMBLY
| 4 |
ASSORTMENT OF POWER WRENCHES AND OTHER ASSEMBLY
TOOLS IN ASSEMBLY AREA.
We also do mechanical and hydraulic assembly, including
pressure and functional testing. |
SPECIAL MACHINES
We have designed and built several special machines
for our use in running high-volume and/or long-running
parts. We build special machines as needed.
MEASURING & INSPECTION EQUIPMENT
| 1 |
COMPUTERIZED GAGE TRACKING SYSTEM |
| 1 |
BROWN & SHARPE MODEL 100 VALIDATOR COORDINATE
MEASURING MACHINE
27 “ x 24 “ x 18 “ (Z) travel
– electronic probe – PC software |
| 1 |
JONES & LAMSON EPIC 30 OPTICAL COMPARATOR
30 “ screen – lenses to 50 to 1 - 30
“ between centers |
| 1 |
PRATT & WHITNEY STANDARD MEASURING MACHINE
24 “ range with optics – accuracy to
.000010 |
| 1 |
PRECISION GAGE –– VARI-ROLL GEAR CHECKER
MODEL G-2 |
| 26 |
GRANITE SURFACE PLATES |
| 1 |
MAGNAFLUX MODEL H720R
16 “ coil – 100 “ length –
DC current reversing demag |
| 2 |
WILSON ROCKWELL HARDNESS TESTER
Model #2003 TB Automatic Triway |
| 1 |
CLARK HARDNESS TESTER
Model #DCR-12 |
| 1 |
RANK TAYLOR HOBSON PROFILOMETER |
| 1 |
PRATT & WHITNEY BENCH MICROMETER (SUPER MIC)
MODEL B
Up to 10-” length measurements – digital
read-outs on head stock |
| 1 |
RAHN
36 “ surface plate calibration machine |
| 1 |
FEDERAL MODEL 136B-5 BENCH MOUNTED I.D.-O.D.
COMPARATOR
Size comparison accurate within .000005 |
| 2 |
TRIMOS
24 “ electronic height gages and accessories |
| 1 |
NIKON STEREO MICROSCOPE WITH FIBEROPTIC
CIRCLE LIGHT
BY BAUSCH AND LOMB |
Also: Large assortment of gage blocks, micrometers,
angle plates, ring gages, granite masters, cadillac
gages, indicators, dial bore gages, indicating micrometers,
etc.
MECHANICAL TESTING
| 1 |
ULTIMATE STRENGTH TESTING MACHINE |
| 1 |
ULTIMATE STRENGTH TORQUE TESTING MACHINE |
| 3 |
LIFE TEST MACHINE |
| 1 |
IMPACT TEST MACHINE |
| 12 |
TORQUE WRENCHES |
COMPUTERS
| 1 |
DELL POWEREDGE E2500, PENTIUM 4 server with 192
gigabytes of RAID 5, Hot Swappable Storage, LAN
Running under Windows 2003 Server, WITH SYSPRO/IMPACT
MANUFACTURING AND BUSINESS SOFTWARE
General Ledger – Payables – Receivables
– Payroll – Job Cost – Inventory
– Purchasing – Accounting – Job
Tracking – Estimating – Shop Floor Control
– Cash Flow Monitoring – Requirements
Planning – MRPII |
| 8 |
DELL CORE 2 DUO ENGINEERING WORKSTATIONS
Surfcam CAM Software with Lathe and 2-3-4-5 Axis
Milling Capability – Solidworks (with Cosmos
FEA), CAD Software – Vericut CNC Program Verification
Software – IGES or DXF Data transfer from
CD or on line – Catia v.5 – MasterCam
XI CAM Software with Lathe and 2-3-4-5 Axis Milling
Capability |
| 42 |
PENTIUM OFFICE WORKSTATIONS
Word Processing – Purchasing – Machine
Loading – Estimating – Office 2000 and
XP |
| 4 |
NETWORKED DNC COMPUTERS
Direct upload and download to CNC machines |
| 10 |
LASER PRINTERS – UP TO 11 X 17 CAPACITY |
|
